Impregnation Inproducts Premium for tents and awnings 400ml

INPRODUCTS impregnation will protect your tent, awning, umbrella or backpack from moisture penetration and contamination. Whether the material is made of membrane, natural leather or synthetic fibres, the easy application of the spray creates a protective thin film of silicon nanoparticles that repels water and dirt. This keeps the fabric or leather dry and breathable, preventing mildew and protecting against damage caused by sunlight. The impregnation is completely odourless.

With INPRODUCTS backpack and tent impregnation you will enjoy your camping to the full. Thanks to the impregnating solution, you and the contents of your backpack will stay dry and warm even during summer showers. A thin film of silicon nanoparticles will prevent moisture penetration and extend the life of your outdoor equipment by several years.

Weight: 0.523 kg
Expiry: 2 years
Brand.
Volume: 400 ml
Consumption: 25 to 100 ml per 1 m2
Packaging: Mechanical spray
Fuse: Yes
Technical features: Preservation of protection against water, dirt and salt for up to 3 months (depending on the intensity of use of the equipment) or up to 10 washing cycles
Composition: dispersion product of modified silicon nanoparticles in aqueous solution. INPRODUCTS products are safe for health and the environment.

Why choose INPRODUCTS tent and awning impregnation:

Prevents the adhesion of dirt:

The solution forms a protective silicon layer on the surface of clothing that repels water and prevents dirt from settling. The impregnation thus prevents, among other things, the appearance of unsightly stains.

Odourless and colourless:

The basis of our impregnation solution is water, whereas the vast majority of competing impregnations are based on organic solvents. As a result, INPRODUCTS' spray is colourless and odourless, it does not endanger your health and you can use it safely even in confined spaces.

Maintains the breathability of the material:

INPRODUCTS outdoor clothing impregnation restores the breathability and properties of membrane textiles (Gore-Tex and others). Your clothes will thus be protected against moisture, but at the same time remain breathable.

Withstands intensive cleaning:

The silicon layer of nanoparticles allows you to clean salt, sweat and other impurities from your fabric during the wash. After drying, the nanoparticles' function is restored. The garment impregnation lasts up to 10 wash cycles with water and up to 5 cycles with detergent. The protective film lasts up to three months.

How the impregnation works

With impregnation you protect:

Textile membranes (Gore-Tex, Gelanots, SympaTex),
natural leather,
synthetic fibres (nylon, polyester),
combinations of the previous materials.

How to use the spray:

How to use the spray correctly:

Clean and dry the fabric before using INPRODUCTS.
Shake the spray thoroughly.
Apply the solution to the fabric in a continuous layer from a distance of 10 to 20 cm. If applying to non-absorbent material, spread the solution over the fabric with a sponge.
After application, allow the fabric to dry for 24 hours. During this time a protective silicon layer will form on the surface.
During drying, place the treated item in a ventilated area.
Store the solution container at temperatures between 3 and 30 °C.
Technical characteristics:

Preservation of protection against water, dirt and salt for up to 3 months (depending on the intensity of use of the equipment) or up to 10 washing cycles.
Consumption: 25 to 100 ml per 1 m2 - depending on the absorption properties of the material.
Shelf life: minimum 2 years from the date of manufacture.
Packing contents: 200 ml, 400 ml, 1 l and 5 l.